Subscribe to Our Youtube Channel
Related Manuals for Holman 40476PE
Summary of Contents for Holman 40476PE
- Page 1 Instruction Guide 40476PE – 40476PL Holman Rancho Cordova, CA 95742 800-343-7486 InstallationSupport@holman.com 20240116R1 DATE: ________________...
-
Page 2: Table Of Contents
• Any previously installed flooring must be removed prior to installing Holman flooring. • Floor must be assembled in vehicle. • 40475HW hardware kit may be necessary to install some accessories to Holman flooring. (40475HW sold separately). • 40477P threshold kit must be installed when installing Holman flooring. (40477P sold separately). -
Page 3: 40476Pl & 40476Pe Parts List
Instructions – 40476PE, 40476PL 40476PL & 40476PE Parts List For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 2... -
Page 4: 18-40476Pl Floor Hardware (All Floor Kits)
Instructions – 40476PE, 40476PL 18-40476PL Floor Hardware (ALL FLOOR KITS) 18-40476PE Floor Extension Hardware (40476PE ONLY) For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 3... -
Page 5: Step 1 - Remove Factory D-Rings
• If re-installing OEM D-Rings remove, OEM bolt from D-Ring. • Using M8 x 35mm hex head bolt, 5/16” lock washer, OEM D-Ring (if desired) and 5/16” fender washer, bolt through Holman floor at OEM D-Ring locations. 5/16” Lock GO BACK AND TIGHTEN ALL Washer HARDWARE. -
Page 6: Attaching Accessories To Floor
1-1/8” drill bit. • In the center of each hole, install a plus nut using the instructions below. • Use 1” x 3/8” plastic spacer (Holman p/n 40501) in each hole as needed to attach accessories to steel van floor.
Need help?
Do you have a question about the 40476PE and is the answer not in the manual?
Questions and answers