Subscribe to Our Youtube Channel
Related Manuals for Holman 40476GL
Summary of Contents for Holman 40476GL
- Page 1 Instruction Guide 40476GL Holman Rancho Cordova, CA 95742 800-343-7486 InstallationSupport@holman.com 20231205R1 DATE: ________________...
- Page 2 • Always locate your installation locations prior to performing any work. • ENSURE SAFETY WHILE INSTALLING OR DRILLING INTO VEHICLE. • Any previously installed flooring must be removed prior to installing Holman flooring. • Floor must be assembled in vehicle.
- Page 3 Instructions – 40476GL Parts List Floor Hardware For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 2...
- Page 4 • If re-installing OEM D-Rings, remove OEM bolt from D-Ring. • Using M10 x 50mm hex head bolt, M10 lock washer, OEM D-Ring and 3/8” fender washer, bolt through Holman floor at OEM D-Ring locations. Note: If not re-installing OEM D-Ring use M10 x 50mm hex head bolt, M10 lock washer and 3/8”...
- Page 5 1-1/8” drill bit. • In the center of each hole, install a plus nut using the instructions below. • Use 1” x 3/8” plastic spacer (Holman p/n 40501) in each hole as needed to attach accessories to steel van floor.
Need help?
Do you have a question about the 40476GL and is the answer not in the manual?
Questions and answers