Creality HALOT-MAGE PRO User Manual page 17

11. Resin in
Pour the UV photosensitive resin into the resin vat. The slot capacity is 500ml/1000ml。
Tips: How to change resin?
Take out the resin vat slowly, pour out the remaining resin into the container,
clean the resin vat, pour in new resin,and then install the resin vat to the
machine.
进料/IN
退料/OUT
暂停/STOP
Caution:
① Resin may cause skin irritation or an allergic skin reaction.
Please wear gloves before use to avoid direct contact with the skin.
② Do not exceed the maximum capacity scale of the tray when
pouring in filaments to prevent them from overflowing during the
printing process
01 13
500ml
1000ml