Do you have a question about the Hi and is the answer not in the manual?
Questions and answers
Ian Harvey
July 8, 2025
Upgraded to Creality print 6.2 now the Creality Hi (LAN) is not listed as the default printer which means that I cannot attribute the filaments properly for multi colored printing. Image 1 shows the filament section in Prepare. The Auto mapping button does nothing. Send print has no printer selected until one is manually selected.
Page 12
tube are calculated based on the optimal distance they need to be manually restored to a circular the other end should be plugged into position f on the...
Page 15
Extruder temperature Home Hotbed temperature Parameters can be manually set Preparation...
Page 24
Creality Cloud the homepage Due to the continuous upgrading of functions, Print Printing...
Page 26
To use this function, the Filament chip information still needs to be manually edited. Filament information read successfully. tion area on the machine to scan and automatically...
Page 27
tube of corresponding silo, push it in gently, and let go after feeling the pulling force. The...
Page 28
leave residue inside the extruder, and cause a blockage!
Page 29
model from the platform. maintenance of the optic axis and guide rail areas.
Page 30
For more detailed maintenance and repair guidance, please...
Page 31
Creality Hi Modeling technology Modeling dimensions Number of extruder Extruder diameter 0.4mm Hotbed temperature Filament type Filament detection Creality Print...
Need help?
Do you have a question about the Hi and is the answer not in the manual?
Questions and answers
Upgraded to Creality print 6.2 now the Creality Hi (LAN) is not listed as the default printer which means that I cannot attribute the filaments properly for multi colored printing. Image 1 shows the filament section in Prepare. The Auto mapping button does nothing. Send print has no printer selected until one is manually selected.
ip address