Rival 2D.2719.1 Installation Manual page 10

INSTALLATION PROCEDURE
ИНСТРУКЦИЯ ПО УСТАНОВКЕ
28. Fix connectors and tape the wiring using
heat shrink tube (item M).
30. Cut weatherstrip (item 10) in the middle, on
2 equal parts.
31. Stick weatherstrip (item 10) on face side of fender, on the edge of fender, as shown in g.33-34.
NOTE! Begin by installing RIVAL 2D.2729.1 inner fender liner in case if you plan to install
RIVAL 2D.2719.1 Fender Flares with RIVAL 2D.2729.1 inner fender liners.
NOTE! Continue with steps 42-48 in case if you plan to install RIVAL 2D.2719.1 Fender Flares
Date: 23-May-2022
Fig. 29
Weatherstrip installation
Fig. 31
Fig. 33
with OE inner fender liners
29. Place wiring into corrugated pipe (item L).
Fig. 30
Fig. 34
Installation manual 2D.2719.1
< Page 10 of 15 >