Advertisement
Quick Links
INSTALLATION MANUAL
PRODUCT:
MODEL:
PART NO:
CAUTION!
To reduce the risk of serious injury or damage, please read and understand all instructions and
procedures before attempting to install or use this product.
Safety glasses must be worn at all times during installation or maintenance of this product.
Ensure all mounting bolts are tensioned after 250 miles and periodically thereafter.
NOTICE
Whilst the bumper adds additional protection to your vehicle, precautionary measures still need
to be taken to avoid damage.
Always drive to the conditions and your surroundings.
REAR BUMPER
JEEP WRANGLER JL (2018-)
2D.2709.1-NL
2D.27
23 -NL
.1
www.rival4x4.com
Advertisement
Related Manuals for Rival 2D.2709.1-NL
Summary of Contents for Rival 2D.2709.1-NL
- Page 1 PRODUCT: REAR BUMPER JEEP WRANGLER JL (2018-) MODEL: PART NO: 2D.2709.1-NL 2D.27 23 -NL CAUTION! To reduce the risk of serious injury or damage, please read and understand all instructions and procedures before attempting to install or use this product.
- Page 2 INSTALLATION NOTICE * The Bumper must be mounted and affixed to the vehicle according to the installation manual provided by an authorized Rival dealer or Motor dealer or by a special vehicle repairer or fitment center. * Estimated time for installation: 2 hours.
- Page 3 PARTS LISTING КОМПЛЕКТАЦИЯ Rear stubby bumper 2D.2709.1-NL Installation manual 2D.2709.1-NL, 2D.2723.1-NL www.rival4x4.com Date: April 29, 2020 < Page 3 of 12 >...
- Page 4 Qty 1 3. Right bracket........Qty 1 4. Left bracket ........5. Tow bar square......... Qty 1 Qty 2 6. Tow hook.......... Installation manual 2D.2709.1-NL, 2D.2723.1-NL www.rival4x4.com Date: April 29, 2020 < Page 4 of 12 >...
- Page 5 PARTS LISTING КОМПЛЕКТАЦИЯ 2D.2709.1-NL / 2D.2723.1-NL А. Screw M 6x 16....... B Screw M 6x20 ....... Screw М10х30 ......Screw М10х50 ......E Bolt М12х30 ......... Qty 3 Bolt М12х120 ........ G Bolt М14х35 ......... Washer 6 ........Washer 10 ........
- Page 6 Unscrew bumper's 2 fitting nuts on the left and right side of the vehicle. the left and right side, close to body mount kit rear. Uninstall OE bumper. Installation manual 2D.2709.1-NL, 2D.2723.1-NL www.rival4x4.com Date: April 29, 2020 < Page 6 of 12 >...
- Page 7 *М14 - 123 Nm 90 7 . lb/ft) (pos.K). Torque hardware to *М14 - and *М10 - 30 Nm (22. b/ft). 123 Nm ( 90 7 . lb/ft). Installation manual 2D.2709.1-NL, 2D.2723.1-NL www.rival4x4.com Date: April 29, 2020 < Page 7 of 12 >...
- Page 8 M6x20 (pos.B), washers 6 bracket lights through the license plate (pos.H) and nuts M6 (pos.M). Torque hole. hardware to * М6 - 9 Nm ( 6.6lb/ft). Installation manual 2D.2709.1-NL, 2D.2723.1-NL www.rival4x4.com Date: April 29, 2020 < Page 8 of 12 >...
- Page 9 24. Unscrew 5 screws that hold bumper sidewall bumper bracket on the left and reinforcement. right side from the inside and 2 screws on the outside. Installation manual 2D.2709.1-NL, 2D.2723.1-NL www.rival4x4.com Date: April 29, 2020 < Page 9 of 12 >...
- Page 10 29. Hammer out 4 parking sensors 30. Install parking sensor washers plugs from the bumper (For the vehicle (pos. L) into the holes that you with parking sensors). hammered out. Installation manual 2D.2709.1-NL, 2D.2723.1-NL www.rival4x4.com Date: April 29, 2020 < Page 10 of 12 >...
- Page 11 (pos. S), fix it using screws lights connector and parking sensors M10x50 (pos. D). Torque hardware to wiring. * М10 - 30 Nm (22.1 lb/ft). Installation manual 2D.2709.1-NL, 2D.2723.1-NL www.rival4x4.com Date: April 29, 2020 < Page 11 of 12 >...
- Page 12 Инструкция по установке INSTALLATION MANUAL Before operating a vehicle fitted with a RIVAL Bumper 2D.2709.1-NL, 2D.2723.1-NL: - make sure all fittings are torqued to proper specifications - check all electrical wiring attached to lights Thank you for your choice! Sincerely,...
Need help?
Do you have a question about the 2D.2709.1-NL and is the answer not in the manual?
Questions and answers