Output Signal Details - Mitsubishi Electric MELSEC iQ-R Series User Manual

Output signal details

The details of each output signal are as follows.
An output signal is enabled when the signal is changed from OFF to ON.
A system does not turn an output signal ON and OFF. To enable an output signal again, turn the output signal
ON and OFF, and ON again.
Error clear request (YF)
The following will be performed if an error clear request is turned ON when a module error is occurring.
• ERR LED is turned OFF.
• ERR LED status (XF) is OFF.
• Most recent error code is cleared.
• Error log area is cleared (excluding the error count).
Area available for user 0 to 15 (Y10 to Y1F)
The area is available for users for reading/writing.
APPX
88
Appendix 2 Input/Output Signals