2
PARAMETER SETTING
Set various operations in parameters with an engineering tool.
2.1
Parameter Setting Procedure
The parameter setting procedure when C intelligent function module is used is shown below.
1.
Add a C intelligent function module to an engineering tool.
[Navigation window] [Parameter] right-click [Module Information] [Add New Module]
2.
Set four types of parameter settings, basic settings, application settings, interrupt settings, and refresh settings, in the
screen displayed by the following operation:
[Navigation window] [Parameter] [Module Information] Target module
3.
Write the settings to a CPU module in the engineering tool.
[Online] [Write to PLC]
4.
Apply the settings by resetting the CPU module, or turning the power OFF and ON.
2 PARAMETER SETTING
48
2.1 Parameter Setting Procedure