Table of Contents
Advertisement
• The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those
labels when you replace the base cover assembly. For the labels that are not shipped with the new base
cover assembly, peel them from the old base cover assembly, and adhere them to the new one.
Item
1
IMEI label
3
Asset tag label
5
Genuine Microsoft label
7
COA label
9
SVT label
M.2 solid-state drive and its bracket (for selected models)
Follow the instructions to replace the 2242 M.2 solid-state drive.
Before you start, read
Generic Safety and Compliance Notices
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for repair. The M.2 solid-state drive is not designed for frequent
changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise, the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
1. Disable the built-in battery. See "Disabling the built-in battery" on page 57.
60
ThinkPad T14s Gen 5 Hardware Maintenance Manual
Item
2
Country label
4
Service QR code
6
S/N label
8
USA RTC Battery warning label
and print the following instructions.
Advertisement
Table of Contents
