Step
Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (2)
Step 2.
Install the system board I/O bracket in reverse order.
I/O cable
For access, remove this FRU: "Base cover assembly" on page 58.
Step 1.
Remove the I/O cable as shown below.
Step 2.
Install the I/O cable in reverse order.
Wireless WAN antennas (for selected models)
For access, remove these FRUs:
• "Base cover assembly" on page 58
• "Built-in battery" on page 64
Step 1.
Remove the wireless WAN antennas as shown below.
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
69