Remove The 2242 Solid-State Drive And Bracket (For Selected Models) - Lenovo ThinkBook 14 Gen 6 Hardware Maintenance Manual

Figure 7. Remove the I/O bracket
Screw specifications
M2.5 × L6 (ThinkBook 14 Gen 6)
M2 × L7 (ThinkBook 16 Gen 6)
M2 × L4
Go to
https://support.lenovo.com/partslookup
replacement parts:
I/O bracket

Remove the 2242 solid-state drive and bracket (for selected models)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board. Then, remove one screw and remove
the 2242 solid-state drive by pulling it away from the slot.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
32
Lenovo ThinkBook 14 Gen 6 and Lenovo ThinkBook 14 Gen 6 Hardware Maintenance Manual
Number of screws
2
2
3
to look up the Lenovo part numbers of the following