Step
Screw (quantity)
4
M1.6 × 2.6 mm, flat-head, nylon-coated (5)
Step 2.
When installing:
• Ensure that the connector is attached firmly.
• Ensure that the cable is routed properly.
Wireless WAN antenna cable guide
For access, remove these FRUs in order:
• "Base cover assembly" on page 58
• "Built-in battery" on page 64
• "Wireless WAN antennas (for selected models)" on page 69
• "Coin-cell battery" on page 75
Step 1.
Remove the wireless WAN antenna cable guide as shown below.
70
ThinkPad T14s Gen 5 Hardware Maintenance Manual
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)