Step
Screw (quantity)
10
M2 × 3 mm, flat-head, nylon-coated (3)
Step 2.
Install the I/O board in reverse order.
Power button with or without fingerprint reader
For access, remove these FRUs:
• "Base cover assembly" on page 58
• "I/O board" on page 66
Step 1.
Remove the power button with or without fingerprint reader as shown below.
Color
Torque
0.181 Nm
Silver
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
67