Pip - Single/Split Screen In Tv Mode; Operation - THOMSON 23LB220S4 Manual

IFC228-LCD_EN
5/07/04 13:26
Advanced functions
EN
Return
Display mode
Programme
Zoom
Position
PIP menu - Single
Return
Display mode
Programme
PIP menu - Split screen
Page 16
Parental control
In the
replaced by
- To disable the parental control function, access the
entering your personal code, select the
press OK
Parental control
In the
replaced by
- The personal code is deleted every time you disable the parental control function.This
means you have to redefine it every time you enable this function again.
- Whenever you enter your code all the locks are disabled until the set is put in standby
again.
- If you have forgotten your PIN code you can cancel it:
When you are prompted to enter your code to access the
press the
eight seconds.This procedure is possible, even if you have locked the buttons on the TV
set.

PIP - Single/Split screen in TV mode

MENU
Press the
OK
press .
PIP
The menu offers the following options :
Display mode
- Off
: PIP is disabled, full screen in TV mode.
- Single
: a channel or AV programme is displayed in a frame in a corner of the screen.
- Split screen
Single...
side. Sound comes from the main programme, on the left.
01
‹ Minimum...
When you enable the PIP function, the other options in the menu are displayed.
Upper right...
Single
- In mode, you can select the programme, the zoom and the position of the frame
on the screen. Select an option from the list each time using the
Split screen
- In
Select an option from the list each time using the
EXIT
Press
OVERVIEW

Operation

Split screen...
‹ 01 Use the PIP
The sound always comes from the main programme.
In both display modes:
- Press OK
- To apply the PIP function to an AV programme in RGB, you need to select
the relevant AV source in the
Single
In mode:
- Use the
- Use the
- Use the
- Use the
Split screen
In
- Use the
- Use the
use the
- Use the
the channel displayed on the left. Press
Press EXIT
Activate parental control
menu the
Deactivate parental control
Deactivate parental control
and enter your code again.
Deactivate parental control
menu the
Activate parental control
œ and ‹ buttons on the side of your set at the same time for
PR VOL
OVERVIEW
button to display the
: select one of the following PIP display modes:
: the screen is divided vertically in two and the PIP is displayed on the right
mode, you can select the programmes to be displayed in both pictures.
to close the menu. Select the option
menu.
button on the remote control to enable the different display modes in turn.
or the FREEZE button to freeze the picture of the main programme.
AV Settings
SWAP button to swap the channels around.
PIP ZOOM button to change the size of the PIP picture.
buttons to change the position of the PIP frame on the screen.
PIP+/PIP- buttons to change programmes on the right side of the screen.
mode:
SWAP button or buttons to swap screens.
PR+/PR- buttons to change programmes on the left side of the screen and
PIP+/PIP- buttons to change programmes on the right side of the screen.
TEXT button (purple) to display on the right side of the screen Teletext on
EXIT
to quit PIP mode and return to full screen in TV mode.
16
option is
.
Parental control
menu by
option and
option is
.
Parental control
menu. In TV mode, select
buttons.
buttons.
Return OK
and press to return to the
RGB
menu (see page 19).
to disable this function.
menu,
PIP
and
as