Using The Remote Control For Other Equipment; Programming The Remote Control - THOMSON 23LB220S4 Manual

IFC228-LCD_EN
5/07/04 13:26

Using the remote control for other equipment

This remote control can be used to control other appliances using the programmable buttons
each button you can control the following appliances:
VCR : video recorder
DVD : DVD player
SAT : satellite receiver, cable network
AMP : hi-fi system, Home Cinema amplifier
AUX : any appliance. For instance, if you have two video recorders, you can program the
program the AUX button to control the other one.
TV
Note: The button is not programmable.

Programming the remote control

Automatic code search
This method can be used to automatically find the most
appropriate code for your appliance.
1.
Switch on the appliance you wish to use the remote control
with.
2.
Press the relevant button for this appliance on the remote
control, and while holding this button down, press the
standby button until the light or the appliance buttons of the
remote control come on. Release both buttons.
3.
Point the remote control at the appliance and press
Wait until the light stops flashing. If the appliance has not gone
into standby mode, press the
the search for the next set of codes. Repeat this operation
until the appliance goes into standby mode.There are around
20 sets of codes.
4.
When the appliance goes into standby mode, switch it on again
without using the remote control. Press the
many times as is required to return the appliance to standby
mode.
5.
Press the STOP button and hold it down until the light or the
appliance buttons of the remote control go off.
Note: you can cancel the programming operation at any time by
pressing the EXIT button.
Video recorder
Press the VCR button.
On/Standby
MENU To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
OK To confirm an action
EXIT To close a menu
0-9 To directly access channels
or enter numeric values
PR+/PR- To change channels
AV To select AV input
REV Rewind
PLAY Play
FWD Fast forward
STOP Stop
PAUSE Pause picture
REC Record
MUTE
+/-
Page 5
PLAY
PLAY button again to continue
REV button as
DVD player
Press the DVD button.
On/Standby
To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action
To close a menu
To enter numeric values
or select options in menus
To change chapters
To select AV input
Rewind
Play
Fast forward
Stop
Pause picture
VCR
VCR button to control one video recorder, and
Manual programming
This method involves carrying out a manual search for the codes
to be used for controlling your other appliances.
1.
Switch on the appliance you wish to use the remote control
with.
2.
Press the relevant button for this appliance on the remote
control, and while holding this button down, enter one of the
codes relevant to your make of appliance (there is a list of
codes at the end of this manual). If the light or the appliance
buttons of the remote control flash you have entered the
.
wrong code or it is not possible to program the remote
control.
3.
Point the remote control at the appliance and press the
relevant button ( VCR
button. If the appliance does not go into standby mode, try
another code.
Depending on the year of manufacture and the type of appliance,
some functions may not be available. Certain codes may cover
more functions than others.Test the functions you can control and,
if appropriate, try other codes. Note here the code(s) which work
best.
VCR
DVD
SAT
When you change the remote control's batteries, remember
to reprogram it.
Satellite receiver
Press the SAT button.
On/Standby
To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action
To close a menu
To directly access channels
or enter numeric values
To change channels
5
Getting started
, DVD , SAT , AMP and AUX
, DVD , etc). Press the standby
AUX
AMP
Hi-fi system
Press the AMP button.
On/Standby
To select a station using
its number
To change stations
To switch the sound off and
back on again
To set the volume level
. For
EN