Advanced Functions; Adjusting The Sound; Headphone Settings; Graphic Equaliser - THOMSON 23LB220S4 Manual

IFC228-LCD_EN
5/07/04 13:26
Return
Sound type
Sound mode
Automatic sound level
Dynamic Bass

Headphone settings

Graphic equaliser

Other settings
Broadcast Sound types
Mono Automatic - Mono
Stereo Mono - Stereo
Dual Sound 1 - Sound 2
NICAM - 3 Sound 1 - Sound 2
Analog AV Stereo - Sound 1 - Sound 2
Sound type
Sound modes
Mono
Normal - Wide
Stereo
Normal - Magic
Sound 1
Normal - Wide
Sound 2
Normal - Wide
Return
Headphone volume
Headphone bass
Headphone treble
Headphone sound
Return
Sound preset
Frequency range
Page 11

Adjusting the sound

Display the
option and press
Sound
The
Stereo...
Sound type
Dolby Virtual...
The default sound type is
‹
Stereo
for AV sources.
Maximum...
...
Note: The options offered depend on the programme you're watching. Refer to the table opposite.
...
...
Sound mode
Magic
Note:
Automatic sound level
keep the same sound level for all channels.
Dynamic Bass
list using the
Headphone settings
Sound 3
further below).
Graphic equaliser
below).
Other settings
Dolby Virtual
EXIT
Press
OVERVIEW
Headphone settings
Headphone settings
Select the
display the menu.Then select each option in turn, using the
‹
volume, bass and treble levels.
Headphone sound
Stereo...
The default sound type is
Stereo
for AV sources.
Press EXIT
OK to confirm.
Graphic equaliser
Graphic equaliser
Select
This menu is used to select a preset parameter and define your own settings using the
graphic equaliser.
Film...
It offers the following options:
Sound preset
programme you are watching.
Personal
The
‹ Treble (10 kHz)... You can access the list of preset sound settings directly by pressing the
(red) on the remote control, selecting the
preset parameters from the list.Your selection is applied to all channels and AV
programmes.
Frequency range
turn using the
Press OK
Note: When you are setting the graphical equaliser,
preset
Press EXIT
OK to confirm.
OVERVIEW
menu by pressing the
OK to confirm.
menu appears with the following options:
: select a sound type from the list using the
Automatic
for mono sources,
:The options available depend on the sound type selected.
Dolby Virtual
and modes are only available for stereo audio sources.
: check the box by pressing the
: this function is used to strengthen the bass. Select an option from the
buttons.
: this option allows access to the headphone setting menu (see
: this option allows access to the graphic equaliser (see further
: see further below.
RETURN
to close the menu. Select
menu.
option from the
: select a sound type from the list using the
Automatic
for mono sources,
to close the menu.To return to the
Sound
from the
: use the buttons to select the appropriate setting for the
setting stores your graphic equaliser settings.
Sound preset
: the graphic equaliser has five frequency bands. Select each band in
buttons and make the necessary adjustments using the
to confirm.
option.
to close the menu.To return to the
11

Advanced functions

Sound
MENU button. Select the
buttons.
Stereo
for stereo sources and
OK
button, if you want to
OK
and press to return to the
Sound
menu and press OK
buttons to adjust the
buttons.
Stereo
for stereo sources and
Sound Return
menu, select
menu and press OK to display the menu.
PRESETS
option and choosing one of the
Personal Sound
appears under the
Sound Return
menu, select
EN
to
and press
button
buttons.
and press