Manual Channel Set-Up - THOMSON 23LB220S4 Manual

IFC228-LCD_EN
5/07/04 13:26
Channel set-up
Return
Standard
Reception
Channel search
Fine tuning
Store on programme
Name
EN Decoder
Use the ¦ ¦ /‹ ‹ keys, or enter the channel number.
Page 8

Manual channel set-up

Follow the procedure given on this page if you find that some channels have not been
stored during the initial set-up.This can happen if you are setting up cable network
channels. Setting up channels manually requires every setting for a particular channel to be
entered, one at a time.
I...
Aerial...
‹ ‹ CH 01
OVERVIEW
Display the
01 option and press
BBC1
menu and press
None...
1.
Select your country using the
Manual installation
Define all the settings in turn for each channel to be stored. Follow the instructions
appearing at the bottom of the screen.
2.
Select the
country.
Note: The following standards are available to choose from:
for France and Luxembourg,
BG
for Western Europe, Australia and New Zealand.
3.
Select the
cable network) using the
4.
Select the
use the
is displayed.
5.
If the picture is not clear you can adjust the setting.You do this by selecting the
tuning
6.
Select the
Press OK
7.
If the channel is encoded and you want to connect a decoder to the AV1 socket, select
Decoder
the
8.
Then select the
assigned to this channel using the numeric buttons (for instance, for BBC1 type 01).
Press OK
Important: Whenever you change a value in the
on programme
Store on programme
cancelled when you change channels or put the TV set in standby.
Repeat this procedure to find other channels.
Notes:
For cable networks, to search for missing channels, select
Auto update
select
If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold
down the
the initial set-up.
Subsequent set-ups:
- The
channels that are missing or wrongly set up.
- The
up (e.g. after moving house). This process deletes all channels previously stored. To set up
a new channel, it is better to use
menu by pressing the
Installation
OK to confirm. Select the
OK to confirm.
buttons. Press
option and press OK
Standard
option. Use the
DKK'
for Eastern Europe, the Middle East and Asia,
Reception
option. Select the reception method for the channels (aerial or
or button.
Channel search
option. Enter the number of the reception channel or
buttons to find the channels.When a channel has been found the picture
option and adjusting it with the
Name
option and choose a name from the list using the
.
option and select AV1 using the
Store on programme
.
Manual installation
option starts flashing. To confirm your change you need to select the
OK
option and press
Installation
in the menu.
PR œ VOL ‹
and buttons on the television until the menu displays. Proceed as for
Auto update
function allows you to set up channels just launched or any
Auto installation
function is used for setting up channels after the initial set-
Auto update
8
Installation
MENU button. Select the
Installation
option from the
OK to confirm. Select the
.
or button to select the standard for your
I France
for the UK and Ireland,
EURO
buttons.
buttons.
or button.
option and enter the number to be
Store
menu, the
. If you do not confirm the change it will be
Other
instead of a country, then
Manual installation
or
Fine
.