Other Settings - THOMSON 23LB220S4 Manual

IFC228-LCD_EN
5/07/04 13:26
Return
Automatic format
Photo Mode
Film mode
Tint
Auto skin tone
TV mode - Full screen and Single
Return
Auto-adjustment
Phase
Clock
Vertical position
Horizontal position
PC mode - Full screen and Single
Page 13

Other settings

Other settings
Select the
menu.
Other settings
The
Automatic format
Advanced...
‹
this box by pressing
Note: This function is only available for certain audio-visual sources.
Photo Mode
still pictures are detected automatically and their resolution enhanced. Check the box to
enable this function by pressing
Note: This function is only available for certain audio-visual sources.
Film mode
quality. Select an option from the list using the
Start
‹
Off
- : function disabled,
On
- : detection,
Advanced
-
Notes:
Advanced
- The
- This function is only available for certain audio-visual sources.
Tint
: is used to adjust the picture's tint.
Note: This function is only available for NTSC audio-visual sources.
Auto skin tone
OK
pressing
Note: This function is only available for NTSC audio-visual sources.
Auto-adjustment
functions. Press
Phase, Clock
Horizontal position
screen.
Vertical position
Press EXIT
OK to confirm.
option from the
menu appears with the following options:
: automatically applies the appropriate format to the picture. Check
OK
to enable this function.
: improves quality and stability of still pictures.When this function is enabled
OK .
: detects that the programme being broadcast is a film and enhances picture
: detection, then enhancement of picture quality.
option is selected by default.
: improves skin tone rendering. Check the box to enable this function by
.
: this function is used to automatically adjust the
OK to start the adjustment process and wait until
: adjust these settings as required in order to enhance picture quality.
: use the buttons to move the picture horizontally on the
: use the buttons to move the picture vertically on the screen.
to close the menu.To return to the
13
Advanced functions
Picture OK
menu and press to display the
buttons:
Phase
and
Done
appears.
Picture Return
menu, select
EN
Clock
and press