"Screen ( G2 )" Adjustment; Focus Adjustment - THOMSON CR14300 Basic Service Data

•
Press "VOLUME +" button and change the value from 0 to 1. Turn off the television and the
ORIGINAL MAGIC setup will be registered.

3.9 "SCREEN ( G2 )" Adjustment

•
Apply a Circle Pattern Philips at the antenna terminal (RF Input).
•
Using the remote control, set the brightness control to 10 Bars of the bargraph.
•
Activate the service mode and select BLKCURR item (the menu value should be 0)
•
Turn the Screen Grid Potentiometer (fly back body) fully counterclockwise (minimum adjustment).
•
Press the "VOLUME +" button . The register will change to 1 and vertical Deflection will be
blanked.
•
Turn the Screen Grid Potentiometer slowly clockwise until the power led (stand by) turn on (if the
adjustment of the screen Grid Potentiometer is turned beyond the ideal point, the power led will be
turn off)
•
Press the "VOLUME +" button, it should return the original BLKCURR value. The image will be
return and the adjustment is finished.
3.10 "FOCUS" Adjustment
•
Apply a Circle Pattern Philips at the antenna terminal (RF Input).
•
Using the remote control, set the Magic mode "ORIGINAL"
•
Turn the Focus volume (fly back body) fully counterclockwise once
•
Adjust the Focus volume until picture is distinct (center of the screen).
All manuals and user guides at all-guides.com
10