Configuring The Sound Settings; Adjusting The Picture - THOMSON 23LB220S4 Manual

IFC228-LCD_EN
5/07/04 13:26
Advanced functions
Return
Left/Right balance
Left/Right speakers
Subwoofer
EN
Return
Picture preset
Brightness
Colour
Tone
Contrast
Contrast expand
Sharpness
Auto noise reduction
Other settings
TV mode - Full screen and Single
Return
Brightness
Colour
Tone
Contrast
Other settings
PC mode - Full screen and Single
Return
Brightness
Colour
Contrast
Tone
TV and PC modes - Split screen
Page 12

Configuring the sound settings

You can configure the sound environment according to the loudspeakers you connect to
your TV set.
‹ ‹
Other settings
Select the
External...
options are the following:
External...
Left/Right balance
Left/Right speakers
(see page 23),
Subwoofer
using the television's subwoofer;
Note: The
Press EXIT
OK to confirm.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.

Adjusting the picture

The menus for adjusting the picture are used to obtain the best picture setting according to
your preference, the type of programme you are watching and the ambient lighting.When
you make an adjustment only the selected option remains displayed, allowing you to see the
changes taking place on screen. The entire menu is displayed again when you select another
Personal...
option or the time for making an adjustment has elapsed.
‹
OVERVIEW
Display the
Warm
to confirm.
Medium...
Picture
The
Low...
Picture preset
...
programme you are watching.
Personal
Contrast
You can access the list of preset picture settings directly by pressing the
(red) on the remote control, selecting the
‹
the preset parameters from the list.Your selection is applied to all channels.You must,
Warm however, select a preset parameter for each AV programme.
Note : This function is only available in TV mode - full screen and PIP
...
Brightness
Note: These settings are automatically stored under
option.
Contrast expand
‹
brightness. Select an option from the list using the
Auto noise reduction
Warm...
reception. Select an option from the list using the
Note: This function is only available for certain audio-visual sources.
Other settings
below).
Press EXIT
press OK to confirm.
option from the
: balance the sound between the left and right speakers.
External
: select if you have connected external side speakers
Internal
if you have not. Otherwise, there would be no sound.
None
: select , if you do not want to use a subwoofer;
External
, if you have connected an external subwoofer.
Internal
option is only available if the television has a subwoofer.
to close the menu.To return to the
menu using the MENU
menu appears with the following options:
: use the buttons to select the appropriate setting for the
contains the values you have defined for the settings
Sharpness
and .
Picture preset
Colour Tone Contrast Sharpness
, , , ,
: can be used to adjust the picture according to the ambient
: improves the quality of the picture in the case of poor
: this option provides access to the
to close the menu.To return to the
12
Sound
menu and press to confirm.The
OK
Internal
, if you are
Sound Return
menu, select
Picture
button. Select and press
Brightness Colour
,
PRESETS
option and choosing one of
Single
.
: adjust these settings as required.
Personal Picture preset
under the
buttons.
buttons.
Other settings
menu (see further
OVERVIEW Return
menu, select
and press
OK
,
button
and