Setting The Time; Programming The Sleep Timer; Programming The Wake-Up Timer - THOMSON 23LB220S4 Manual

IFC228-LCD_EN
5/07/04 13:26
Advanced functions
Return
Sleep timer
Clock reference programme
Time and date
Wake-up timer
Wake-up time
Switch on for
Programme number
EN
Daily
Page 14

Setting the time

Time
The menu can be used to set the time on the TV set and program the automatic
sleep timer or wake-up timer functions.
OVERVIEW
Display the
and press OK
‹ 00:15
02
12:34 03/03/03
Setting the time
07:00
1.
01:00
Select the
10 CNN
2.
Select a channel with Teletext which can provide the time to be used as a reference
using the
remote control.The time is displayed after a few seconds if it is available on the
selected channel.
If the time is not provided by Teletext the
and a message prompts you to change reference channel or enter the time manually.
You do this by selecting the
numeric buttons or the
Note: If the power supply is disrupted (i.e. the set is switched off using the on/off button or
unplugged, or there is an electrical fault), the time will disappear if it has been entered manually.
You must reset it. We therefore recommend you find the time on a channel and check that it is
correct.
Once the time has been set you can use the

Programming the sleep timer

1.
Select the
2.
Set an automatic shut-off time (from 0 to 4 hours in 5-minute intervals) by using the
buttons. Set the time to 00:00 to disable this function.
Note:You can access this function directly by pressing the
control.
When the sleep timer is on, a message appears one minute before the television set goes
into standby mode. Press any button on the remote control to cancel standby mode.

Programming the wake-up timer

This function can be used to set the time for the set to come on, for instance, for the
television to wake you up.
1.
Select the
this function and provides access to the relevant options.
2.
Under the
buttons.
3.
Under the
(from 5 minutes to 4 hours in intervals of 5 minutes).
4.
Under the
to wake you using the
using the
to the AV socket to come on as well.
5.
For a daily wake-up check the box for the
6.
Press EXIT
7.
Put the TV set into standby mode using the
The TV set will automatically come on at the programmed time if you do not interrupt it
by using the remote control. Once the TV set is on:
- you can use all its functions as normal;
- you can put the TV into standby mode. In this case, the
disabled for the relevant day;
- if the channel or AV programme selected from the menu is locked you need to enter your
code to access it.
menu by pressing the
to confirm.
Clock reference programme
buttons, or enter a channel number using the numeric buttons on the
Wake-up timer
Time and date
buttons.
Wake-up timer
Sleep timer
option.
Wake-up timer
option and press
Wake-up time
option enter the wake-up time using the numeric or
Switch on for
option, use the
Programme number
option enter the number of the channel you want
or numeric buttons.You can also select an AV programme
AV button. In this case, make sure you programme the equipment connected
Daily
to close the menu.
14
Time
MENU button. Select the
option.
function is not available
option and entering the time using the
function.
SLEEP button on your remote
OK to check the box, which enables
buttons to set the period of time
option by pressing OK .
button on the remote control.
Wake-up timer
function is
option