Configuring Av Sockets - THOMSON 23LB220S4 Manual

IFC228-LCD_EN
5/07/04 13:26
Return
AV1 name
AV1 video input
AV2 name
AV2 video input
AV3 name
AV3 video input
CMP name
DVI input
Select the name of the device
connected to AV1.
Page 19

Configuring AV sockets

You can configure your TV set according to the equipment you connect to it.
OVERVIEW
Display the
‹ DECOD. option and press
RGB...
settings
option and press
VCR1
S-Video...
Follow the messages on screen and the instructions below explaining how to configure the
CAMCOR...
AV sockets.
Video...
CMP
AV1 name
PC
connected to this socket. If the factory preset names do not suit you, select
enter another one, following the screen messages.
AV1 video input
transmitted by the equipment connected to the AV1 socket.
Note: Select
Repeat the above procedure to configure the AV2 and AV3 sockets.
CMP name
connected to this socket. If the factory preset names do not suit you, select
and enter another one, following the screen messages.
DVI input
: use the
transmitted by the equipment connected to the DVI socket.
Press EXIT
Installation
MENU
menu using the
OK Installation
to confirm.The
OK
to confirm.
: use the buttons to select from the list the name of the equipment
: use the buttons to select from the list the type of video signal
RGB
if no picture is displayed when you connect a games console.
: use the buttons to select from the list the name of the equipment
buttons to select from the list the type of video signal
to close the menu. Select the option
menu.
19
Advanced functions
Installation
button. Select the
AV
menu appears. Select the
AV1_ _ _
CMP_ _ _
Return
and press OK to return to the
and
EN