Selecting The Number Of Rings; Setting The Greeting Monitor Function - Panasonic KX-TCD961CXB Operating Instructions Manual

KX-TCD961CXB(17~21)

Selecting the Number of Rings

You can select the number of times the unit rings before the answering system answers a call, from 2
to 7 or AUTO (for Toll Saver*). The factory preset is AUTO.
1
Press then
2
Press .
" " is displayed on the handset.
" P " is displayed on the base unit.
3
2
Press .
The current setting is displayed on the
base unit.
4
Press dialing button
to set the number of rings.
0: Selects "AUTO"." A " is displayed.
2-7: The unit will answer after the selected
number of rings.

Setting the Greeting Monitor Function

When your greeting message is being played to the caller, you can listen to it through the base unit
speaker. To listen to your greeting, set to 2 (ON). The factory preset is 1 (OFF).
1
Press then
2
Press .
" " is displayed on the handset.
" P " is displayed on the base unit.
3
4
Press .
The current setting, "1" or "2", is displayed
on the base unit.
99.12.3 2:06 PM Page 21
I N T
.
0 2 7
or to
I N T
.
5
Press .
*Toll Saver
(When set to "AUTO")
When you call the unit from a touch tone
telephone:
If the unit answers on the 2nd ring, there is at
least one new message.
If the unit answers on the 5th ring, there are
no new messages.
Hang up when you hear the 3rd ring.This
will save you the toll charge for the call.
4
2
To set to ON, press
OR
1
To set to OFF, press
The setting is displayed.
5
Press .
.
.
21