16
Each ST60 instrument is supplied with a standard bezel for surface
mounting. Optional mounting kits are available for flush mounting and
bracket mounting the instrument. If you have ordered the flush
mounting option a low-profile bezel and four fixing screws are
provided in the kit.
Fitting the instrument
The ST60 Multi instrument can be installed using one of a number of
different mounting options:
• Surface mounting. Gives a profile of approximately 24 mm.
• Flush mounting. Gives a profile of approximately 6 mm.
• Bracket mounting.
The ST60 instruments can also be mounted behind a panel with just
the instrument dial and keys visible.
Surface mounting
To surface mount your ST60 instrument (see the Surface mounting
illustration):
1. Ensure that:
• The selected location is clean, smooth and flat.
• There is sufficient space behind the selected location to
accommodate the rear of the instrument and connectors.
Surface mounting
ST60 Multi Instrument Owner's Handbook
4
1
2
1
3
5
2
5
D4340-1