Navigate Chapter Pages; Environment Chapter Pages; Autopilot Chapter Pages - Raytheon ST60 Owner's Handbook Manual

6

Navigate chapter pages

Function Title Remarks
Bearing to BTW
waypoint
Distance to DTW
waypoint
Cross track error XTE
Waypoint WP
number/name
Latitude LAT
Longitude LON
Course over COG
ground
Speed over SOG
ground
Satellites tracked SATS

Environment chapter pages

Function Title Remarks
Water WATER Displayed as either °C or °F.
temperature
Battery voltage VOLTS Supply voltage.
Time -
Date -

Autopilot chapter pages

Function Title
Pilot status -
Rudder angle RUDDER In degrees either P(ort) or S(tarboard).
Displayed in degrees. Either TRU(e) or MAG(netic) depending on the
value set during User calibration (see Chapter 4, Calibration ).
In kilometres (KM), statue miles (SM), or nautical miles (NM).
Shown in the currently selected distance units. A steering bar at the top of the
screen show the direction to steer. The number of arrows in the bar is proportional
to the amount of cross track error; each arrow represents 0.05 nm of error.
Number or name displayed, depending on the set up made in User calibration (see
Chapter 4, Calibration ). Cross track error (XTE) is shown by the large characters.
Current latitude.
Current longitude.
Shown in degrees. Either TRU(e) or MAG(netic), as set during User calibration (see
Chapter 4, Calibration ).
Displayed in kilometres per hour (KMH), miles per hour (MPH), or knots (KTS).
Current satellite count.
Either 12- or 24-hour clock, as set during User calibration (see Chapter 4,
Calibration ).
Either USA or European format, as set during User calibration
(see Chapter 4, Calibration).
Remarks
Same function as pop up pilot display, but does not time out.
ST60 Multi Instrument Owner's Handbook