Pop-Up Pilot; Remote Control - Raytheon ST60 Owner's Handbook Manual

10
2. There are four preset contrast settings. Momentarily press the
3. Press any other key to leave the contrast-adjust mode.
Note: The display will also return to normal operation 7 seconds after
the last key press.

1.8 Pop-up Pilot

A Pop-up Pilot facility enables instruments connected to SeaTalk to
constantly monitor any changes to the autopilot mode and to the course
settings. If one of these parameters changes, the new value is
immediately displayed on the ST60 instrument for 5 seconds, after
which time the display reverts to the previous display.
This facility can be enabled or disabled during User calibration (see
Chapter 4, Calibration).

1.9 Remote control

When it is connected to SeaTalk, the ST60 Multi instrument can be
controlled remotely with a SeaTalk Remote Keypad Unit. Remote
control of an instrument is indicated by a REMOTE legend on the
display, to indicate that the keypad has control.
Details on how to use the remote control facility can be found in the
SeaTalk Remote Keypad Owner's Handbook.
key to cycle through the these settings until you achieve optimum
display quality.
ST60 Multi Instrument Owner's Handbook