Using The Track Key; Alarms; Internal Alarms - Raytheon ST60 Owner's Handbook Manual

Chapter 1: Operation

1.4 Using the track key

If your system includes a SeaTalk navigator, you can use the track
key as follows:
1. To enter track mode, press the track key once.
2. To advance to the next waypoint, press the track key for
3. To leave track mode, press the track key a third time.

1.5 Alarms

Internal alarms

The ST60 Multi instrument responds to alarm signals by sounding an
internal buzzer and by flashing the appropriate alarm message at the
top of the screen alternately with the normal top line of the current
display. The alarm messages are as follows:
Message
SHALLOW water*
DEEP ALM
ANCHOR
WIND ALM
LOW VOLT
GUARD
MARPA
RAD FAIL
*If a depth alarm occurs while a page in the depth chapter is displayed,
or a wind alarm occurs while a page in the wind chapter is displayed,
the screen will revert to the first page of the respective chapter.
To cancel an alarm, press any one of the ST60 Multi front panel keys.
1 second.
Meaning
Deep water*
Deep or shallow anchor*
Wind speed*
The power supply voltage has fallen below the low voltage threshold
Radar alarm
Radar alarm
Radar alarm
7