Temperature Units; Waypoint Identity; Select Nmea Or Auxiliary Alarm; Auxiliary Alarm Enable - Raytheon ST60 Owner's Handbook Manual

Chapter 4: Calibration

Temperature units

You can select either Centigrade (°C) or Fahrenheit (°F). If the
temperature units have been defined elsewhere on SeaTalk, this screen
is not displayed.

Waypoint identity

Determines whether waypoints are identified by name (WP NAME) or
by number (WP NO).

Select NMEA or Auxiliary Alarm

If the ST60 Multi is connected to NMEA, select ON. If the Auxiliary
Alarm option is fitted select OFF, to enable the Auxiliary Alarm.

Auxiliary Alarm enable

If the Auxiliary Alarm option is fitted, use this screen to determine
which alarms you want to sound at the Auxiliary Alarm. The screen
heading shows which alarm you are setting, and when you have set
one alarm, press the
ON = alarm enabled, OFF = alarm disabled.
The screen titles and associated alarms are displayed in the following
sequence:
Title
SHALLOW
DEEP ALM
ANCHOR
WIND ALM
WATCH
OFF CRS
WND CHNG
LOW BATT
AUTO REL
WPT ADVN
key to display and set the next alarm.
Alarm function
Shallow alarm
Deep alarm
Anchor alarm
High true wind speed
Watch alarm
Off course alarm
Wind change alarm
Low battery
Auto release
Waypoint advance
29
continued ...