Table of Contents
Advertisement
Enable Screen Lock – enable the screen lock in the Idle device mode. Enter the screen lock PIN to unlock
the user interface.
Screen Lock PIN – set the screen lock activation/deactivation code.
Display Setting Menu – display the Setting menu. Or, configure the device via the web and remote access.
Display Time in Idle Mode – allow the device to display time in the idle mode.
When the Doorbell Button Function is set to Doorbell (refer to
notification is displayed whenever the doorbell is pressed. If the Idle time transition timeout is ≤120 s, the
notification will be displayed for 120 seconds. If the Idle time transition timeout is >120 s, the home screen
will be displayed after the 120-second timeout until the device goes into the Idle mode.
Backlight
Display Backlight Intensity – set the backlight brightness level. Set the value as a percentage of the
maximum possible LED brightness.
Intensity Reduction in Idle Mode to – set the level of reduction of the backlight intensity if the device goes
into Idle mode.
Go to Idle Mode in – set the inactivity timeout after which the device switches to the Idle mode.
User Localization
Original language – download a
with all the texts to be displayed in English.
Custom language – remove
Custom Language Upload
1.
Download the original language file (English).
2.
Modify the file using a text editor (replace the English texts with your own ones).
3.
Upload the modified localization file back to the intercom.
4.
Set Language to
Custom (p. 43)
5.
Check and correct if necessary the texts on the intercom display.
Digital Inputs
The Digital Inputs menu describes the digital input options for the device.
Doorbell Button
Doorbell Button Function – select a doorbell function (doorbell, alarm call). The button is used either as a
classical doorbell or for alarm call activation.
Camera Assigned to Doorbell Button – select the external camera to be displayed when the doorbell is
ringing. The camera preview does not interrupt the active call or ringing. Tap on the green bar in the display
upper part to return to the call/ringing. If the doorbell is not confirmed, a warning will be displayed on the
device and a record will be created in the Call log.
System
The System section includes the following menus:
•
Network (p. 45)
•
Date and Time (p. 46)
•
Functions (p. 47)
•
Certificates (p. 48)
Configuration
localization file template for a translation of your own. It is an XML file
, download
and upload
in "Basic Settings".
44
Digital Inputs (p.
44)), a bell activation
a localization file of your own.
Advertisement
Table of Contents
