Table of Contents
Advertisement
Custom language – remove
Custom Language Upload
1.
Download the original language file (English).
2.
Modify the file using a text editor (replace the English texts with your own ones).
3.
Upload the modified localization file back to the intercom.
4.
Set Language to
Custom (p. 40)
5.
Check and correct if necessary the texts on the intercom display.
Digital Inputs
The Digital Inputs menu describes the digital input options for the device.
Doorbell Button
Doorbell Button Function – select a doorbell function (doorbell, alarm call). The button is used either as a
classical doorbell or for alarm call activation.
System
The System section includes the following menus:
•
Network (p. 41)
•
Date and Time (p. 43)
•
Functions (p. 43)
•
Certificates (p. 44)
•
Auto Provisioning (p. 45)
•
Diagnostics (p. 46)
•
Maintenance (p. 47)
Network
2N Clip is connected to the LAN and has to be assigned a valid IP address or obtain the IP address from the
LAN DCHP server. The Network section helps you configure the IP address and DHCP.
TIP
To retrieve the IP address, use 2N Network Scanner, which can be downloaded freely from
2N.com.
Refer to Subs.
If the network uses the RADIUS server and 802.1x-based verification of connected equipment, you can
make the intercom use the EAP-MD5 or EAP-TLS authentication. Set this function in
Basic
Use DHCP server – enable automatic obtaining of the IP address from the LAN DHCP server. If no DHCP
server is existing or available in the network, set the network manually.
Static IP Address Setting
Static IP Address – static IP address of the device. The address is used together with the below mentioned
parameters if the Use DHCP Server parameter is disabled.
Network Mask – network mask setting.
Default Gateway – default gateway address for off-LAN communication.
Configuration
, download
and upload
in "Basic Settings".
IP Address Retrieval Using 2N Network Scanner (p. 21)
41
a localization file of your own.
802.1x (p.
for details.
42).
Advertisement
Table of Contents
