Lcd Description - Eaton 9A UPS Manual

9A UPS 1-3K

4.2 LCD description

In order to make sure all segments are OK, LCD begins to do self-test after power on. During
self-test, all the segments will be lighted for 2 seconds, then the LCD will turn to normal
display status.
Mode/Fault/Warning
Informa�on
Input Informa�on
Ba�ery Informa�on
The following table describes the LCD display information provided by the UPS:
LCD display
Mode/Fault/Warning Information
Input Information
Hz
Vac
INPUT
Battery Information
BATTERY
+
Setting indication
Fault indication
Load Information
LOAD
Output Information
Hz
Vac
OUTPUT
Hz
Vac
INPUT BATTERY
+
Se�ng indica�on
Description
It Indicates the operating mode or Fault kind or Warning kind, several
warning kinds at the same time could be displayed alternately.
It indicates input voltage/frequency value, which are displayed alternately.
It indicates the battery capacity. Every grid represents the capacity of 20%.
It indicates the UPS is in setting mode.
It indicates the UPS is in Fault mode or has some warnings.
It indicates the load level. Every grid represents the level of 20%.
It indicates output voltage/frequency value, which are displayed alternately.
18
Hz
Vac
OUTPUT LOAD
Fault indica�on
Output Informa�on
Load Informa�on