How To Assemble Your Ceiling Fan Blades - Fanimation PENDRY 56 FPD6865 Series Manual

How to Assemble Your Ceiling Fan Blades

CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
1. Slide the blade through the slot in the motor
assembly and position blade over the motor assembly
with threaded posts showing. Make sure the bottom
edge of the blade is fully seated against the flywheel
of motor assembly. Tighten blade plate with 3/16˝-24
screw assembly to secure the blade to the flywheel of
motor assembly. (Figure 1)
HARDWARE USED:
Blade Plate with
3/16˝-24 Screw Assembly
8
Blade Plate with
3/16˝-24 Screw
Assembly
(1 each per blade)
Blade
Figure 1
x 7