How To Install Your Remote Control; Maintenance; How To Clean Your Ceiling Fan Blades - Fanimation PENDRY 56 FPD6865 Series Manual

fanSync Wireless Router Guide (Continued)
You may also need:
• A photo of all the information on the back of your router (make/model, serial number, device access code, etc.)
Your router manufacturer's website may require this information to guide you to the correct set up instructions
and complete the set-up.
• Your current WiFi password
Step 1
Enter the web configuration address found on the back of your router into a web browser on a device that
is connected to that WiFi network (can be a phone, tablet or computer) to get to the wireless page of the router's
website. Follow the manufacturer's instructions on how to configure a 2.4GHz band.
Step 2
Select the 2.4GHz setting page and set the WiFi Name (SSID) to XXX-2.4G, where XXX indicates the WiFi
name you'd like. Save settings.
Step 3
Navigate to the 5GHz setting page and set the WiFi Name (SSID) to XXX-5G, where XXX indicates the WiFi
name you'd like. Save settings.
By adding the -2.4/5G suffixes to your WiFi names you will be able to easily tell the two bands apart. When the
settings are complete, the two new WiFi network names will appear in the WiFi settings screen of your smartphone
and you can pair by joining the network that ends in "-2.4G".
NOTE: After the WiFi names are changed, you need to reconnect all of the devices that use this wireless router.
The password(s) remains the same if it has not been changed.

How to Install Your Remote Control

1. Installing Wall Plate: (Figure 1)
Attach wall plate using the two provided screws.
Periodic cleaning of your new ceiling fan is the only
maintenance necessary.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.

How to Clean Your Ceiling Fan Blades

Periodic light dusting of the blades is recommended.
A feather duster will work best.

Maintenance

Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the blades.
27
Screws (2)
Figure 1
CAUTION
Wall Plate