How To Assemble Your Ceiling Fan Blades - Fanimation SPITFIRE MAD6721 Series Manual

How to Assemble Your Ceiling Fan Blades

CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
1. Secure the three blades using the 1/4˝-20 screws
and blade plate assembly through the holes located
on the bottom of the motor housing assembly.
(Figure 1)
NOTE: You will find the fan blade set packed in its
own carton and hardware bag in the fan box.
2. Position the trim cover onto the blade plate
assembly bottom. (Figure 2)
NOTE: Trim cover is included with the blade set,
not with the fan.
Motor Housing
Assembly
Blade Plate
Assembly
1/4˝-20
Screws
13
1/4˝-20 Screw
(2 each per blade)
Figure 1
HARDWARE USED:
Blade Plate Assembly
Trim Cover
(not included)
Figure 2
Blade
(not included)
X 6