How To Assemble Your Ceiling Fan Blades - Fanimation FLORID LP8300 Series Instruction Manual

How to Assemble Your Ceiling Fan Blades

1. Remove the three stabilizer tabs and plastic bag
from the motor. Discard the stabilizer tabs. (Figure 1)
2. Remove the two set screws and locking nuts of the
downrod support from the motor assembly then retain
the screws and nuts for How to Assemble Your
Ceiling Fan, Step 4. (Figure 2)
3. Remove the six preassembled screws of the motor
coupler washer from the motor assembly, then retain
the screws for reinstallation in Step 7. (Figure 3)
4. Lift away the motor coupler washer and upper
housing cover from the motor assembly and set aside.
(Figure 4)
Motor
Assembly
Motor
Assembly
Upper Housing
Cover
7
Stabilizer
Tabs
Figure 1
Downrod Support
Figure 2
Figure 3
Motor Coupler
Washer
Motor
Assembly
Figure 4