How To Install Your Canopy Housing; How To Assemble Your Ceiling Fan Blades - Fanimation SCULPTAIRE FP8511 Series Manual

How to Install Your Canopy Housing

NOTE: This step is applicable after the neccessary
wiring is completed.
1. Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care not
to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that was
previously removed. (Figure 1)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
2.
Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket
utilizing the key slot twist-lock feature. (Figure 2)

How to Assemble Your Ceiling Fan Blades

1. Position the blade over the blade holder of motor
assembly with threaded posts showing. Make sure the
bottom edge of the blade is fully seated against the
blade holder. Place blade plate over the blade with
holes aligned and assemble blade to blade holder of
motor assembly using 3/16"-24 serrated head screws.
(Figure 1)
CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
Blade
Holder
3/16˝-24
Serrated Head Screws
Blade Plates
12
Ceiling
Canopy
Figure 1
Canopy Screw
Cover
Figure 2
Motor
Assembly
Blade Plate
Figure 1
HARDWARE USED:
Blade
x 9
x 3