Prog. Colour Allocation; Process Technology; Anti-Crease; Drying Levels - Miele PDR 914 Operating And Installation Instructions

Supervisor level

Prog. colour allocation

You can assign a specific colour to a favourite programme. In the list of favourites, each fa-
vourite programme is given a coloured frame, which can be adjusted.
- Factory default: Off
- On

Process technology

Anti-crease

At the end of the programme, the drum will continue to rotate at intervals if the laundry is
not removed immediately.
Changing this setting leads to increased energy consumption.
The setting for Anti-crease  can either be switched off or a time between 1 and 12 hours
can be selected.
Factory default: 2 hours

Drying levels

Changing this setting leads to increased energy consumption.
You can alter the drying levels for the
Drying levels
Cottons
Factory default: normal

Further cooling

If extended cooling is activated, the drum temperature is checked approx. 1 minute before
the machine goes into standby mode at the end of the programme. If the temperature is
above 55 °C, the dryer will carry out cooling until it is below 55 °C.
Changing this setting leads to increased energy consumption.
- Factory default: off
- On

Cooling down temperature

The laundry will be cooled down automatically after the end of the programme. The auto-
matic cooling phase can be set at a cooler level for all programmes. This means that the
cooling phase is extended.
Changing this setting leads to increased energy consumption.
The setting can be changed from 40 °C–55 °C.
Factory default: 55 °C
34
Cottons
, and
Minimum iron Automatic plus
, and
Minimum iron Automatic plus
can be set to one of 7 different levels.
programmes.