Remote; Remote Update; Machine Parameters; Legal Information - Miele PDR 914 Operating And Installation Instructions

Supervisor level

Remote

External programme selection is possible via an external terminal (programme may only be
started on the machine). However, programmes may also be selected and started on the
machine.
Factory default: on

Remote update

The RemoteUpdate function is used for updating the software in your tumble dryer.
RemoteUpdate is activated by default.
If you do not install a RemoteUpdate, you can continue to use your tumble dryer in the
usual way. However, Miele recommends installing RemoteUpdates.
Miele's RemoteUpdate function can only be used if the tumble dryer is connected to a
WiFi/LAN network and you have an account in the Miele Professional app. The tumble
dryer must be registered in the app.
See the Miele Professional app for terms of use.
If a RemoteUpdate is available for your washing machine, it will be displayed automatically
when the Operator level is open.
You can choose to start the RemoteUpdate immediately or wait until later. If you select
"Start later", the prompt to run the RemoteUpdate will be displayed again the next time you
switch on your washing machine.
The RemoteUpdate can take a few minutes.
Please note the following information about the RemoteUpdate function:
- You will only receive a message when a RemoteUpdate is available.
- Once a RemoteUpdate has been installed, it cannot be undone.
- Do not switch off the tumble dryer during a RemoteUpdate. Otherwise, the RemoteUp-
date will be aborted and will not be installed.

Machine parameters

Legal information

Open source licences
You can view information here.
Copyright and licences
For the purpose of operating and controlling the machine, Miele uses proprietary or third-
party software that is not covered by open source licensing conditions. This software/these
software components are protected by copyright. The copyrights held by Miele and third
parties must be respected.
Furthermore, this machine contains software components which are distributed under
open source licensing conditions. You can access these open source components along
with the corresponding copyright notices, copies of the licensing conditions valid at the
time and any further information. This information can be found under the menu option
/
tings Machine parameters
rangements for the open source licences displayed in this location only apply in relation to
the respective rights holders.
38
/ /
Legal information Open source licences
. The liability and warranty ar-
Set-