Programme Packages - Miele PDR 914 Operating And Installation Instructions

Caution: When activating any of these options, the Supervisor level will no longer be
available.
You will no longer be able to access the Supervisor level via the display. Please follow the
instructions below if you wish to change any other settings.
Opening the Supervisor level (launderette version)
Switch the tumble dryer on and open the dryer door.

Touch the Start/Stop sensor and hold it down whilst carrying out steps -.

Close the dryer door.

Wait until the Start/Stop sensor, which will now be flashing quickly, lights up con-

stantly ...
... and then release the Start/Stop sensor.

-
Standard
Factory default: all (selected) programmes are available.
-
Launderette, basic
12 programmes are available.
Under
Favourite programmes
-
Laundrette Logo
12 programmes are available.
Under
Favourite programmes
-
Laundrette Logo ext. time
4 timed drying programmes* with different temperature levels are time-controlled via an
external payment system.
The set value indicates the programme running time and cannot be modified by the user.
* The maximum programme running time is specified during initial commissioning.
-
Laundrette Logo int. time
4 timed drying programmes* with different temperature levels are time-controlled via the
tumble dryer electronic module.
The set value indicates the maximum programme running time and can be modified by
the user.
* The maximum programme running time is specified during initial commissioning.
-
External prog. selection
A communication module can be used to select the programme from an external ter-
minal.

Programme packages

This allows you to specify the scope of the tumble dryer programme. You can select all of
the programmes or individual programmes from the relevant programme packages.
The tumble dryer's additional scope of programmes can be configured. The programmes
are listed under "Programme chart".
, you can set which of the 12 programmes to select or modify.
, you can set which 12 programmes to select/modify.
Supervisor level
31