Connectivity
Pairing instructions
Follow the steps below to connect the tumble dryer to your network.
Opening the supervisor level
Select the
Supervisor
Select the
Access via code
Enter the 3-digit supervisor code.
Establishing the network connection via WPS
Select the
Supervisor level
Then select the
COM module selection
If you are using an external communication module, select the
menu option.
Otherwise, select the
Select
.
WiFi
Select
.
Set up
Select the connection method
Now press the WPS button on your router and confirm with
A timer starts. The network connection via WPS is being established.
The appliance is now successfully connected.
Touch
to confirm.
OK
Establishing the network connection via soft AP
Select the
External applications
Then select the
COM module selection
If you are using an external communication module, select the
menu option.
Otherwise, select the
Select
.
WiFi
Select
.
Set up
Select the connection method
Confirm pressing
Establishing the network connection using a LAN cable
Select the
External applications
Then select the
COM module selection
If you are using an external communication module, select the
menu option.
Otherwise, select the
Connect the appliance to your router/switch using the network cable. The router/switch
must be connected to the Internet.
The appliance is now successfully connected.
40
menu option in the appliance display.
menu option.
menu option from the
Internal mod. Domestic
Via WPS
menu option from the
Internal mod. Domestic
Via Soft AP
and follow the instructions in the external application.
OK
menu option from the
Internal mod. Domestic
External applications
menu option.
menu option.
.
Supervisor level
menu option.
menu option.
.
Supervisor level
menu option.
menu option.
menu.
External mod. Professional
in the appliance display.
OK
menu.
External mod. Professional
menu.
External mod. Professional