Program Color Allocation; Process Technology; Anti-Crease; Drying Levels - Miele PDR 914 Operating And Installation Instructions

Moving programs/favorites
You can move/change the order of the programs (program menu – single option list). You
can also move and change the order of the favorites that you edit in the Supervisor level un-
der Favorite programs.
Touch the program that you wish to move.

Press and hold the sensor control until the frame changes.

Drag the program to the required place.


Program color allocation

You can assign a specific color to a favorite program. In the list of favorites, each favorite
program is given a colored frame, which can be adjusted.
- Factory default: Off
- On

Process technology

Anti-crease

At the end of the program, the drum will continue to rotate at intervals if the laundry is not
removed immediately.
Changing this setting leads to increased energy consumption.
The setting for Anti-crease  can either be switched off or a time between 1 and 12 hours
can be selected.
Factory default: 2 hours

Drying levels

Changing this setting leads to increased energy consumption.
You can alter the drying levels for the
Drying levels Cottons
els.
Factory default: Normal

Additional cooling

If extended cooling is activated, the drum temperature is checked approx. 1 minute before
the machine goes into standby mode at the end of the program. If the temperature is
above 130°F (55°C), the dryer will carry out cooling until it is below 130°F (55°C).
Changing this setting leads to increased energy consumption.
- Factory default: Off
- On

Cooling down temperature

The laundry will be cooled down automatically after the end of the program. The automatic
cooling phase can be set at a cooler level for all programs. This means that the cooling
phase is extended.
Changing this setting leads to increased energy consumption.
Cottons
, Minimum Iron , and
,
Minimum Iron
Automatic Plus can be set to one of 7 different lev-
Supervisor level
, and
Automatic Plus
programs.
37