Installation; Installation Requirements; General Operating Conditions; Transport - Miele PDR 914 Operating And Installation Instructions

Commercial tumble dryers
Hide thumbs Also See for PDR 914:
Table of Contents

Advertisement

If it is necessary to install a residual current device (RCD) in ac-
cordance with local regulations, a residual current device type B
(sensitive to universal current) must be used.
Limitations to dryer operation due to reconnecting/removing jump-
ers.
Modifying/removing jumpers at the heater elements in order to set
lower heater ratings may result in limitations to dryer operation. De-
pending on the type of laundry, length of vent ducting, and outside
temperature, the desired drying results may no longer be achieved.
In the event of a reduction, the specified consumption data will no
longer be achieved.
After installing the tumble dryer, equipotential bonding must be es-
tablished. The equipotential bonding must comply with the local and
national installation specifications.

Installation requirements

 Risk of injury or damage to property due to improper installa-
tion.
Incorrect installation of the tumble dryer can lead to personal injury
or damage to property.
The tumble dryer must only be installed and commissioned by Miele
Customer Service Department or an authorised dealer.
The tumble dryer must be installed in accordance with all relevant
regulations and standards.
The dryer must only be operated in a room that has sufficient ventil-
ation and which is frost-free.
The tumble dryer must not be installed behind a closeable door or a
sliding door. The maximum opening angle of the tumble dryer door
must not be limited by objects or doors. It must be possible to fully
open the tumble dryer door at any time.

General operating conditions

This dryer is intended only for use in a commercial environment and
must only be operated indoors.
Do not install the tumble dryer in a room where there is a risk of frost.
Depending on the nature of the installation site, sound emissions and
vibrations may occur.
Tip: Have the installation site inspected and seek the advice of a pro-
fessional in instances where increased noise may cause a nuisance.

Transport

The tumble dryer must not be transported without a transport pal-
let.
Suitable transport aids must always be used during transportation.

Installation

47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdr 918Pdr 922Pdr 928Pdr 944

Table of Contents