Pp User Password - Veikong VFD200A Series Operation Manual

deceleration time selection
PC-36 9th run time
The 9th paragraph acceleration
PC-37
and deceleration time selection
PC-38 Run time of paragraph 10
Section 10 acceleration and
PC-39
deceleration time selection
PC-40 Run time in paragraph 11
The 11th paragraph acceleration
PC-41
and deceleration time selection
PC-42 Run time in paragraph 12
The 12th paragraph acceleration
PC-43
and deceleration time selection
PC-44 Run time of paragraph 13
The 13th paragraph acceleration
PC-45
and deceleration time selection
PC-46 Run time in paragraph 14
The 14th paragraph acceleration
PC-47
and deceleration time selection
PC-48 Run time in paragraph 15
The 15th paragraph acceleration
PC-49
and deceleration time selection
PC-50 Simple PLC runtime unit
Multi-segment
PC-51
given mode
This parameter determines the given channel of the multi-segment instruction 0.
In addition to the PC-00, the multi-segment instruction 0 has a variety of other options to facilitate
switching between multiple short instructions and other given modes. When a multi-segment command is
used as a frequency source or a simple PLC as a frequency source, switching between the two frequency
sources can be easily realized.

PP User password

PP-00 user password
PP-00 sets any non-zero number, then the password protection function takes effect. The next time you
enter the menu, you must enter the password correctly. Otherwise, you cannot view and modify the
function parameters. Please remember the user password you set.
If PP-00 is set to 00000, the set user password will be cleared, and the password protection function
will be invalid.
Chapter 6 Parameter Instruction
0.0s（h）～6553.5s（h）
0～3
0.0s（h）～6553.5s（h）
0～3
0.0s（h）～6553.5s（h）
0～3
0.0s（h）～6553.5s（h）
0～3
0.0s（h）～6553.5s（h）
0～3
0.0s（h）～6553.5s（h）
0～3
0.0s（h）～6553.5s（h）
0～3
0: s (seconds) 1: h (hours)
0: Given by PC-00
1: Given by AI1
2: AI2 given
instruction 0
3: panel potentiometer
4: PULSE
5: PID given
6: P0-08 can be modified by UP/DOWN
0～65535
103
Default：0.0s(h)
Default：0
Default：0.0s(h)
Default：0
Default：0.0s(h)
Default：0
Default：0.0s(h)
Default：0
Default：0.0s(h)
Default：0
Default：0.0s(h)
Default：0
Default：0.0s(h)
Default：0
Default：0
Default：0
Default：0