Wall Mount; Desktop Installation; Power On The Phone - Grandstream Networks GHP63 Series User Manual

GHP63X/W Phone Setup
The GHP63X/W can be installed on the desk or can be mounted on the wall. Please follow the instructions below for each
installation method

Wall Mount

1. On the wall where the GHP630/W & GHP631/W will be mounted, mark two dots with 100mm distance in between
vertically.
2. Using a drill, make a hole on each marked dot. Put a plastic expansion bolt and screw (not provided) into each hole. Leave
enough space on the screws to mount the GHP630/W & GHP631/W.
3. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone.
4. Mount the GHP630/W & GHP631/W on the screws using its "Wall Mount Slots".

Desktop Installation

For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the phone where there is
a slot for the phone stand.

Power on the phone

To power on the GHP630/W & GHP631/W:
For GHP630W & GHP631W: Connect the 12V DC output plug to the power jack on the phone; plug the power adapter
into an electrical outlet.
For GHP630 & GHP631: A PoE switch can be used to power up the device without the need of the 12V power adapter.
GHP63X Desktop Mount