Editing An Item In The Directory; Erasing An Item In The Directory - Panasonic KX-TGA420B Operating Instructions Manual

Using the Directory
Editing an Item in the Directory
Make sure that the station unit is in the standby mode.
J
Press ◄ or ► to enter the directory.
2
Press v or /\ to find the directory item you want to edit.
• To search for the item by initial, see page 27.
3 Press [EDIT).
• If you do not need to change the name, go to
step 5.
4 Edit the name using the dialing buttons, up to
16 characters (p. 26).
• To move the cursor, press ◄ or ►.
5
Press
(ENTER
1.
• If you do not need to change the number, go to
step 7.
(3 Add a number to the current number.
• Pressing [CLEAR] erases the digit to the left of
the cursor. To erase all digits, press and hold
(CLEAR].
7
Press
I ENTER],
• A beep sounds.
• To edit other items, start again from step 2.
• To return to the standby mode, press [EXIT).
Erasing an Item in the Directory
Make sure that the station unit is in the standby mode.
J Press ◄ or ► to enter the directory.
2
Press v or a to find the directory item you want to erase.
• To search for the item by initial, see page 27.
3 Press
I CLEAR).
• To stop erasing, press -4.
4 Press
[ENTER].
• A beep sounds and "clear" is displayed.
• To erase other items, start again from step 2.
• To return to the standby mode, press [EXIT].
• To erase all items in the directory, see page 38.
Clear?
«=No ENTER=Yes
Enter name:
Dane
ENTER=Next
Enter name:
Jane WalkeQ
ENTER=Next
□234567
ENTER=Save
098n234567
ENTER=Save
28