Calling Line Selection.36 - Panasonic KX-TGA420B Operating Instructions Manual

Other Programmable Settings
Calling Line Selection
The station unit will automatically select a free line when you make a call.
You can change the calling line selection.
Make sure that the station unit is in the standby mode.
J Press I FUNCTION).
2
Press v or a until the arrow points to
"Line selection",
and press ►.
• The current setting is displayed.
Auto:
A free line will be selected (LINE 1 has priority)
when making a call (factory preset).
Linel:
Line 1 will be selected when making a call.
Line2:
Line 2 will be selected when making a call.
Line3:
Line 3 will be selected when making a call (for users registered to
KX-TG4000B only).
Line4:
Line 4 will be selected when making a call (for users registered to
KX-TG4000B only).
3 For users registered to KX-TG4000B:
Select
"Linel", "Line2", "Line3", "Line4"
or
"Auto"
by pressing v or a .
For users registered to KX-TG2000B:
Select
"Linel", "Line2"
or
"Auto"
by pressing v or a . (Do not
select
"Line3"
or
"Line4".)
4 Press fenter!.
• A beep sounds.
• To return to the standby mode, press [EXITJ.
• Any line can be selected manually, regardless of the programmed line selection,
by pressing that line button. If registered to KX-TG2000B, the
[LINE 3]
and
[LINE 4]
buttons are inoperative.
i
For users registered to KX-TG2000B: j
Do not select
"Line3"
or
"Line4"
for the calling line selection. Otherwise j
"Line not available"
will be displayed when you lift the handset off ;
the cradle or press
I DIGITAL SP-PHONEl
to make or answer a call.
Line selection „
:jjinel j
va
ENTER^S a vev'
Save directory
Ringer setting
►Line selection
Line selection ,
:Auto
va ENTE&=Save''
36