1.1 Notes on possible severe personal injury
DANGER
!
Risk of bursting in pressure equipment.
Valves and pipelines are pressure equipment. Excessive pressurization or improper
opening can lead to valve components bursting.
Î Observe the maximum permissible pressure for valve and plant.
Î Before starting any work on the control valve, depressurize all plant sections affect-
ed as well as the valve.
Î Drain the process medium from the plant sections affected as well as from the
valve.
1.2 Notes on possible personal injury
WARNING
!
Risk of burn injuries due to hot or cold components and pipelines.
Depending on the process medium, valve components and pipelines may get very hot
or cold and cause burn injuries.
Î Allow components and pipelines to cool down or warm up to the ambient tempera-
ture.
Î Wear protective clothing and safety gloves.
Risk of hearing loss or deafness due to loud noise.
The noise emissions depend on the valve version, plant facilities and process medium.
Î Wear hearing protection when working near the valve.
Risk of personal injury due to exhaust air being vented.
While the valve is operating, air is vented from the actuator, e.g. during closed-loop op-
eration or when the valve opens or closes.
Î Install the control valve in such a way that vent openings are not located at eye level
and the actuator does not vent at eye level in the work position.
Î Use suitable mufflers and vent plugs.
Î Wear eye protection when working in close proximity to the control valve.
EB 8015 EN
Safety instructions and measures
1-5