Notes On Possible Severe Personal Injury - Samson 2404-2 Mounting And Operating Instructions

Safety instructions and measures
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for
Type 2 N or 2 NI Strainer
e.g.
e.g. Type 2406 Excess Pressure Valve
e.g. Type 2441 Pressure Reducing Valve
− Mounting and operating instructions as well as data sheets for additional fittings (e.g.
shut-off valves, pressure gauges etc.).

1.1 Notes on possible severe personal injury

DANGER
!
Risk of bursting in pressure equipment.
Regulators and pipelines are pressure equipment. Impermissible pressure or improper
opening can lead to regulator components bursting.
Î Observe the maximum permissible pressure for regulator and plant.
Î If necessary, a suitable overpressure protection must be installed on site in the plant
section.
Î Before starting any work on the regulator, depressurize all plant sections affected
as well as the regulator.
Î Drain the process medium from all the plant sections affected as well as the regula-
tor.
Î Wear personal protective equipment.
1-4
u EB 1015
u EB 2522
u EB 2626-1
EB 2540 EN