Description On Flexible Card Wire; Disconnecting/Connecting The Flexible Card Wire; Forming Before Installation - Sony CCU-D50 Service Manual

1-14. Description on Flexible Card Wire
1-14. Description on Flexible Card Wire
1-14-1. Disconnecting/Connecting the
Flexible Card Wire
The flexible card wires are used as follows:
Be careful not to bend these wires. This shortens the wire
life.
Disconnecting
1. Turn OFF the POWER of this unit.
2. Slide portion A in the direction of the arrow and pull
out the flexible card wire.
'4
A
Conductive surface
Connecting
* Be careful not to insert the flexible card wires obliquely.
* Check that the conductive surface of the flexible card
wire is not soiled with dust.
1. Slide portion A in the direction of the arrow and insert
the flexible card wire as far as it will go into connector
with the conductive surface of the wire put down.
2. Slide portion A in the opposite direction of the arrow
and lock.
1-14-2. Forming Before Installation
If using a new flexible card wire, be sure to hand-form it as
shown in the figure before installation.
Never fold it back after being formed once.
PR-270/270A board CN15 © IF-879 board CN1
IF-879 (CN1)
Insulated surface (Blue)
Conductive surface (Silver)
__ PR-270/270A
(CN15)
PR-270/270A board CN19 <> IF-884 board CN1
IF-884 (CN1)
Insulated surface (Blue)
Conductive surface (Silver)
PR-270/270A (CN19) —
CCU-D50/D50P SMV1E