1-5. Location of Printed Wiring Boards
1-6. Removing and Reinstalling the Cabinet
1-5.
Location of Printed Wiring Boards
1-6-2. Front Panel
ere
BOLT E DORI
1. Remove the top cover. (Refer to Section 1-6-1.)
u
3
:
board
te
~
CN-2311 board
2. Remove the two screws, and remove the side cover in
e
a
rN \ CN-2310 board
the arrow direction.
|
CN-2312 board
Sx
Side cover
LASS
0
IF-879 board
PR-270/270A board
1-6.
Removing and Reinstalling the
Cabinet
Side cover
1-6-1. Top Cover
1.
Remove the two screws, and remove the top cover in
3.
Remove the six knobs.
the arrow direction.
4.
Loosen the three screws, and remove the front panel
from the four claws on the side frames.
Top cover
Front panel
5.
Reinstall the front panel in the reverse order of
removal.
2.
Reinstall the top cover in the reverse order of removal.
1-8
CCU-DS50/D50P SMV1E